Reset Your BlueAnt

Step 3: Reset the BlueAnt Supertooth 3

Once you have completed a reset of your phone, you are ready to reset your BlueAnt device:

1. If the Supertooth 3 is on, turn it off by holding down the green Multi-Function button for about 5 seconds (until you hear a voice announce "BlueAnt ST3 powering down").
2. Hold down "Vol +" and the green Multi-Function button until you hear a loud siren/distinctive tone.
3. The Supertooth 3 will turn on. Hold down the green Multi-Function button for about 5 seconds to turn it off again.
4. The Supertooth 3 has now been reset: all pairing and other information has been deleted. When you turn the Supertooth 3 back on again it will prompt you to select a language and then go into pairing mode.

You will now need to re-pair your phone with your Supertooth 3.

Step 4: If You Are Still Experiencing Problems

If you have completed a reset of both your phone and your BlueAnt device and you are still experiencing problems, then we suggest you contact our support team, who will help you out with any difficulty you may be experiencing.