Pairing Your BlueAnt

Step 4: Select Your Palm Model

Select your phone model from the list below.

Palm® Pre™

  1. Open the Connection Menu.
  2. Select Bluetooth and make sure that Bluetooth is turned on (select Turn on Bluetooth if it is off).
  3. On the Bluetooth menu, select Add device.
  4. Wait for your phone to search for devices, then select your BlueAnt device from the list.
  5. If you are prompted for a PIN, enter 0000 (four zeros).
  6. If you are prompted to allow the connection, select Yes, allow.
  7. When the Devices list appears, the pairing is complete.

Your BlueAnt device is now paired.

Palm® Treo™ Pro

  1. Select Start.
  2. Select Settings.
  3. Select the Connections tab.
  4. Select Bluetooth.
  5. Select the Mode tab.
  6. Make sure that Bluetooth is turned on (check that there is a tick next to Turn on Bluetooth).
  7. Select the Devices tab.
  8. Select Add new device.
  9. Wait for your phone to search for devices, then select your BlueAnt device from the list.
  10. If you are prompted for a PIN, enter 0000 (four zeros).
  11. Select Done to complete the pairing.

Your BlueAnt device is now paired.

Palm® Treo™ 750

  1. Select Start.
  2. Select Settings.
  3. Select Connections.
  4. Select Bluetooth.
  5. Make sure that Bluetooth is turned on (check that there is a tick next to Turn on Bluetooth).
  6. Select Devices.
  7. Select New Partnership.
  8. Wait for your phone to search for devices, then select your BlueAnt device from the list.
  9. If you are prompted for a PIN, enter 0000 (four zeros).
  10. Select Next to confirm the device display name, and Finish to complete the pairing.

Your BlueAnt device is now paired.

Palm® Treo™ 680 / Palm® Treo™ 650

  1. Press the Menu button.
  2. Select Bluetooth.
  3. Make sure that Bluetooth is turned on.
  4. Select Setup Devices.
  5. Select Hands-free Setup.
  6. Select Next.
  7. Wait for your phone to search for devices, then select your BlueAnt device from the list.
  8. If you are prompted for a PIN, enter 0000 (four zeros).
  9. Select OK, then Next, then Done to complete the pairing.

Your BlueAnt device is now paired.

Palm® Centro™

  1. Press the Applications button.
  2. Select Bluetooth.
  3. Make sure that Bluetooth is turned on.
  4. Select Setup Devices.
  5. Select Hands-free Setup.
  6. Select Next.
  7. Wait for your phone to search for devices, then select your BlueAnt device from the list.
  8. If you are prompted for a PIN, enter 0000 (four zeros).
  9. Select OK, then Next, then Done to complete the pairing.

Your BlueAnt device is now paired.

Other Palm Models

We are currently working to include pairing instructions for as many phone models as possible. If your phone is not yet listed in our system, then follow these general steps:

  1. Go to your phone's Bluetooth menu.
  2. Select Pair, Add Device, or Add New Device.
  3. Wait for your phone to search for devices, then select your BlueAnt device from the list.
  4. If you are prompted for a PIN, enter 0000 (four zeros).
  5. If you are prompted to connect to the device, select Yes or Connect.

Your BlueAnt device is now paired.

On some phones you may also need to change a security setting to ensure that your phone will automatically reconnect to your BlueAnt device in future. Check the section on pairing in your phone's manual or consult your phone manufacturer for more information. If this applies to your phone you will need to configure your BlueAnt device as a "trusted device".

Palm, Treo, Pre, Centro, and Treo Pro are trademarks of Palm, Inc.